NordicTrack C 850s Treadmill English Manual - Page 17
step 18 is completed.
View all NordicTrack C 850s Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
16. Note: If the treadmill is assembled on a smooth surface, it may roll forward during this step. Remove the two 5/16" x 3/4" Screws (4) from the Latch Crossbar (38). Raise the Frame (56) to the upright position. Have a second person hold the Frame until step 18 is completed. Orient the Latch Crossbar (38) as shown. Make sure that the "This side toward belt" sticker (M) is facing the treadmill. Attach the Latch Crossbar to the brackets (N) on the Frame (56) with the two 5/16" x 3/4" Screws (4) that you just removed and two 5/16" Star Washers (11). 16 11 4 56 N 38 M N 11 4 17. Remove the 5/16" Nut (34) and the 5/16" x 1 3/4" Bolt (6) from the bracket on the Base (94). 17 Next, orient the Storage Latch (53) as shown. Attach the lower end of the Storage Latch (53) to the bracket on the Base (94) with the 5/16" x 1 3/4" Bolt (6) and the 5/16" Nut (34) as shown. Then, raise the Storage Latch (53) to a vertical position, and remove the tie (O). O 53 34 94 6 17