NordicTrack Elite 7500 Treadmill English Manual - Page 10

7. Slide the Right Upright Sleeve (96) up against the console assembly. Attach the Right Upright 7 Sleeve with two 3/4" Screws (4). Attach the Left Upright Sleeve (not shown) to the console assembly in the same way. Console Assembly 4 96 4 8. With the help of a second person, raise the front of the treadmill and insert the crossbar on 8 the Base (83) into the cutout in the cardboard stand as shown. Have the second person hold the treadmill to prevent it from moving forward or backward. Firmly tighten the four Upright Bolts (72). With the help of a second person, lower the treadmill off the cardboard stand. 83 72 9. Note the location of the 75 ohm terminal and the audio/video input jack on the treadmill. For the 9 television to operate, the Audio/Video Wire Harness (115) must be connected to the audio/video input jack on the treadmill or a CATV cable or an antenna must be connected to the 75 ohm terminal (see page 11). 72 Cardboard Stand Audio/ Video Input 75 Ohm Terminal 115 10. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see page 30). To protect the floor or carpet from damage, place a mat under the treadmill. 10