NordicTrack Elite 7500 Treadmill English Manual - Page 8

2. Identify the Right Upright (74) and the Left Upright (73). Hold the Right Upright near the Right Base Cover (77). See the inset drawing. Locate the wire tie in the rectangular hole in the lower end of the Right Upright. Tie the wire tie securely around the end of the Upright Wire Harness (75). Then, pull the other end of the wire tie up through the Right Upright until the Upright Wire Harness is routed through the Right Upright. Gently pull up on the Upright Wire Harness (75) as you set the Right Upright (74) on the Base (83) inside the Right Base Cover (77). Be careful not to pinch the Upright Wire Harness. Attach the Right Upright (74) to the Base (83) with two Upright Bolts (72) and two Upright Star Washers (90). Do not tighten the Upright Bolts yet. Note: It may be necessary to tip the tops of the Uprights forward slightly as you thread the Upright Bolts into the Uprights. Hold the Left Upright (73) near the Left Base Cover (76). Use the wire tie to route the TV Cable (49) and the AV Wire (97) through the Left Upright as described above. Set the Left Upright on the Base (83) inside the Left Base Cover. Attach the Left Upright to the Base with two Upright Bolts and two Upright Star Washers (not shown). Do not tighten the Upright Bolts yet. With the help of a second person, lower the treadmill off the cardboard stand. Save the cardboard stand for step 8. 2 Wire Tie 97 49 75 73 Wire Tie 75 74 Wire Tie 74 76 77 83 90 72 3. Identify the Right Upright Sleeve (96) and the 3 Left Upright Sleeve (95); the Upright Sleeves are labeled "Left" and "Right." Slide the Right Upright Sleeve onto the Right Upright (74), and slide the Left Upright Sleeve onto the Left Upright (73). 73 95 "Left" "Right" 96 74 8