NordicTrack Elite 7500 Treadmill English Manual - Page 9

4. With the help of a second person, hold the console assembly near the Uprights (73, 74). Connect the Upright Wire Harness (75) to the Console Wire Harness (71). See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Remove the wire tie from the Upright Wire Harness. 4 Console Assembly 71 75 73 75 Wire Tie 71 74 5. Connect the TV Cable (49) and the AV Wire (97) to the cables extending from the console assembly. Remove the wire tie from the wires. Then, insert the connectors down into the Uprights (73, 74). 5 Console Assembly 99 Next, insert the brackets on the Handrails (99) into the Uprights (73, 74). Make sure that no wires are pinched. 49 97 73 Wire 99 Tie 74 6. Partially tighten three Handrail Bolts (64) with three Upright Star Washers (90) into the Right Upright (74). Next, partially tighten three Handrail Bolts with three Upright Star Washers (not shown) into the Left Upright (73). Then, firmly tighten the six Handrail Bolts. 6 73 90 64 64 90 74 9