NordicTrack Ellipse E7 English Manual - Page 9

Install the Upright Tube • Lift the upright tube into position to align the holes in the upright tube and the upright lithe support. insert the hex bolt all the way through the upright tube support and upright tube. Finger tighten the nut onto the bolt. • Connect the electronic cables by snapping [-hero together. • Connect the tension cables by inserting the end of the cable casing into the hole in the plastic. connector frame. fighten the fittings together to connect the ends. (AimpoRTAmT) Make sure the upright-tube latch is secured in the notch in the upright-tube Slippori and the knob is securely tightened. LA CAUTION-) Keep your hands free of the upright-tube pivot point when raising or lowering the upright tube. (A um-mu-) Never turn the upright tube knob more than four counterclockwise rotations. Plastic connector frame • lower the machine to its normal resting position and tighten the hex bolt and nut with the wrenches provided. • Raise the upright tube to a vertical position until the upright tube knob latch clicks into the notch in the upright tube support. Tension cable casing .=M1 --. , Fittings Upright tube • Turn the upright tube knob clockwise to securely tighten the uprip,hi. tube knob in the notch. Tension cable Upright tube knob Electric cables Hex's,.\ bolt Upright tube support Upright tube Upright tube knob latch ink Actual size assembly bolt