NordicTrack Fs5i Instruction Manual - Page 10

8. See the inset drawing. Identify a Handlebar Cover (40) and the Right Rear Leg Cover (44), and slide them onto a Handlebar (16) as shown. Tip: Avoid pinching the wires. Insert the Handlebar (16) into the right side of the Upright (4), and attach it with two M10 x 45mm Bolts (119) and two M10 x 18mm Washers (138). Tip: Avoid pinching the wires. Press the Right Rear Leg Cover (44) into the Pivot Covers A and B (37, 38). Then, press the Handlebar Cover (40) into place. Repeat this step on the other side of the elliptical. 8 16 Avoid pinching the wires 119 138 37 38 16 40 44 4 9. Attach the Accessory Tray (111) to the Upright (4) from below with two M4 x 16mm Screws (143). Then, attach the Accessory Tray (111) to the Upright (4) from above with two M4 x 10mm Screws (148). 16 40 44 9 148 4 111 143 10