NordicTrack Fs5i Instruction Manual - Page 7
do not overtighten the Locknut
 |
View all NordicTrack Fs5i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2. Attach a Wheel (53) to one side of the Stabilizer (3) with an M10 x 70mm Bolt (130) and an M10 2 Locknut (133); do not overtighten the Locknut; the Wheel should turn freely. Attach the other Wheel (53) in the same way. 53 133 53 3 130 3. Tip: Avoid pinching the wires. With the help of one or two other people, set the Upright (4) on the pins (A) on the Frame (2). Attach the Upright (4) to the Frame (2) with eight M10 x 25mm Screws (123); start all the Screws, and then tighten them. Then, connect the 48" Wire (52) in the Upright (4) to the 40" Wire (51) in the left side of the Frame (2) and to the 18" Wire (161) in the right side of the Frame. 3 Avoid pinching the wires 123 52 51 123 2 A 4 52 161 2 A 7
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
 |
 |
7
3
130
53
53
133
2.
Attach a Wheel (53) to one side of the Stabilizer
(3) with an M10 x 70mm Bolt (130) and an M10
Locknut (133);
do not overtighten the Locknut;
the Wheel should turn freely.
Attach the other Wheel (53) in the same way.
2
3.
Tip: Avoid pinching the wires.
With the help of
one or two other people, set the Upright (4) on
the pins (A) on the Frame (2).
Attach the Upright (4) to the Frame (2) with
eight M10 x 25mm Screws (123);
start all the
Screws, and then tighten them.
Then, connect the 48" Wire (52) in the Upright
(4) to the 40" Wire (51) in the left side of the
Frame (2) and to the 18" Wire (161) in the right
side of the Frame.
3
4
2
2
A
52
52
51
161
123
123
Avoid
pinching
the wires
A