NordicTrack Fs5i Instruction Manual - Page 9

6. Identify the Strap (21) on the Right Pedal Arm (15). Route the Strap under the Roller (89); make sure that the Strap is not twisted. Make sure that the Glide Belt (19) on the Right Pedal Arm (15) is resting on top of the Roller (89) and that the Strap (21) is routed under the Roller. Tip: It may be helpful to have a second person press downward on the Right Pedal Arm (15) while you perform the following action. Make sure to orient the Strap Clamp (23) as shown in the inset drawing. Attach the Strap (21) to the Strap Bracket (22) on the Right Pedal Arm (15) with three M6 x 20mm Screws (118) and a Strap Clamp; start all the Screws, and then tighten them. Repeat this step for the Left Pedal Arm (14). 6 22 23 118 14 89 19 21 15 89 19 21 23 7. Identify the Left and Right Rear Belt Covers (24, 25), and then attach them to the Left Pedal Arm (14) with five M4 x 16mm Screws (143); start all the Screws, and then tighten them. Repeat this step on the other side of the elliptical. 7 143 24 14 25 143 9