NordicTrack Fs5i Instruction Manual - Page 8

4. Identify the Right Shield Cover (36) and the Right Front Shield Cover (47). Attach them around the right side of the Upright (4) with two M4 x 16mm Screws (143). Tip: Avoid pinching the wires. Attach the Left Shield Cover (35) and the Left Front Shield Cover (43) around the left side of the Upright (4) in the same way. 4 Avoid pinching the wires 43 4 35 36 47 143 5. Identify the Right Pedal Arm (15). Using a plastic bag to keep your fingers clean, apply a generous 5 amount of the included grease to the axle on the Right Pedal Arm. Insert the axle on the Right Pedal Arm (15) into the Right Pivot Leg (13) from the direction shown. Attach the Right Pedal Arm (15) with an M8 x 14mm Shoulder Screw (122), an Axle Cover (30), and an Axle Washer (31). Attach the Left Pedal Arm (14) to the Left Pivot Leg (12) in the same way. 12 14 Grease 13 15 31 30 122 8