NordicTrack Reflex 8500 Pro Treadmill English Manual - Page 10
Locate the Latch Assembly 88. Remove
 |
View all NordicTrack Reflex 8500 Pro Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
7. Attach the two Console Clamps (104) to the console assembly with four #8 x 1" Screws (115). Start all four Screws, and then tighten all of them. Be careful not to overtighten the Screws. Tighten the two 1/4" x 1/2" Bolts (28). 7 Console Assembly 104 104 115 115 28 28 8. Orient the Latch Housing (89) so that the large hole is on the side shown. Attach the Latch 8 Housing to the left Upright (43) with two #8 x 3/4" Screws (12). Do not overtighten the Screws. Locate the Latch Assembly (88). Remove the knob from the pin; make sure that the collar and the spring are on the pin. Then, insert the pin into the Latch Housing (89), and tighten the knob back onto the pin. Knob 89 12 88 Large Hole 43 Spring Collar Pin 10
-
1 -
2
-
3
-
4
-
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
 |
 |
10
8.
Orient the Latch Housing (89) so that the large
hole is on the side shown.
Attach the Latch
Housing to the left Upright (43) with two #8 x
3/4" Screws (12).
Do not overtighten the
Screws.
Locate the Latch Assembly (88). Remove the
knob from the pin; make sure that the collar and
the spring are on the pin. Then, insert the pin
into the Latch Housing (89), and tighten the
knob back onto the pin.
12
Spring
Knob
89
8
43
Collar
Large
Hole
Pin
88
7.
Attach the two Console Clamps (104) to the
console assembly with four #8 x 1" Screws
(115).
Start all four Screws, and then tighten
all of them. Be careful not to overtighten the
Screws.
Tighten the two 1/4" x 1/2" Bolts (28).
7
104
28
28
115
115
Console
Assembly
104