NordicTrack Reflex 8500 Pro Treadmill English Manual - Page 24

HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL To avoid damaging the treadmill, adjust the incline to the lowest position before you fold the treadmill. Then, remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill. 1. Hold the walking platform firmly in the location shown by the arrow below. CAUTION: Do not hold the treadmill by the plastic parts. Make sure to bend your legs and keep your back straight. Raise the walking platform about halfway to the vertical position. To protect the floor or carpet, place a mat under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the storage position in temperatures above 85° F (30° C). HOW TO MOVE THE TREADMILL Before moving the treadmill, fold it as described at the left. CAUTION: Make sure that the plate is resting against the pin. Moving the treadmill may require two people. 1. Hold the uprights and place one foot against a wheel. Walking Platform Uprights 2. Hold the walking platform firmly with your right hand. Pull the latch knob to the left and hold it. Raise the walking platform until the plate passes the pin on the latch knob. Release the latch knob. Make sure that the plate is resting against the pin as shown. Walking Platform Latch Knob Wheel 2. Pull back on the uprights until the treadmill will roll on the wheels, and carefully move it to the desired location. CAUTION: Do not move the treadmill without tipping it back and do not move the treadmill over an uneven surface. 3. Place one foot against a wheel, and carefully lower the treadmill. Plate Pin 24