NordicTrack Reflex 8500 Pro Treadmill English Manual - Page 8

3. Cut the tie from the Right Handrail (102). If necessary, press the 5/16" Cage Nut (99) back into 3 place. Cut the tie holding the Upright Wire (93). Route the Upright Wire through the Right Handrail (102) as shown. Slide a Handrail Cover (103) onto the lower end of the Right Handrail (102) as shown. Set the Right Handrail on the right Upright (43) and slide the lower end of the Right Handrail onto the bracket on the right Upright. Make sure not to pinch the Upright Wire (93). Start three 5/16" x 3/4" Bolts (2) with two 5/16" Star Washers (4) into the right Upright (43) and the Right Handrail (102). Then, start two #10 x 1/2" Screws (117). Firmly tighten the three Bolts and the two Screws. Slide the Handrail Cover (103) against the right Upright (43). Tie 102 93 99 24 103 2 43 Bracket 117 4. Set the console assembly face-down on a soft surface to avoid scratching the console assem- 4 bly. Attach the Left Accessory Tray (110) and the Right Accessory Tray (111) to the console assembly with eight #8 x 3/4" Screws (12). 111 12 12 12 110 12 Console Assembly 8