NordicTrack Reflex 8500 Pro Treadmill English Manual - Page 9
Sole May Be Damaged When You Turn
View all NordicTrack Reflex 8500 Pro Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
5. With the help of a second person, hold the console assembly near the Uprights (43). Connect the Console Ground Wire (55) to the Ground Wire (105). Next, connect the console wire to the Upright Wire (93). See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN YOU TURN ON THE POWER. Then, insert the wires into the Right Handrail (102) and the right Upright (43). 5 Console Assembly 55 105 Console 93 Wire 43 102 Console Wire 93 6. Set the console assembly on the Left and Right Handrails (101, 102) and the Uprights (43). Be 6 careful not to pinch any wires. Partially tighten two 1/4" x 1/2" Bolts (28) with two 1/4" Star Washers (116) into the Handrails (101, 102) and the console assembly. Do not fully tighten the Bolts yet. Console Assembly 43 116 28 102 101 116 28 9