NordicTrack Vr23 Bike English Manual - Page 27

27

5.

Use WiFi–Advanced to set up a wireless

connection.

This option will allow you to set up a wireless

network connection using your computer, smart

phone, tablet, or other Wi-Fi device.

On your computer, smart phone, tablet, or other

Wi-Fi device, open the list of available networks

to which your device can connect. One of the

options will be IFIT_SETUP; select this network. If

this network does not appear, make sure that your

Wi-Fi device is within range of the console, and

then close and re-open your list of networks. Also,

see CLEAR WIFI SETTINGS on page 26 and

clear any previous wireless network settings on the

console.

Note: The network IFIT_SETUP will not appear

if the console has already been configured to

connect to a wireless network. Also, Android™

devices may not be able to detect IFIT_SETUP.

The console will display an IP address, such as

192.168.0.1:8080. Open a web browser on your

computer, smart phone, tablet, or other Wi-Fi

device. Next, type in the IP address on the con-

sole into the URL bar in your browser. Example:

http://192.168.0.1:8080.

Your browser will load a web page. If the web page

does not appear, double-check the IP address and

the previous instructions of this step. Follow the

instructions on the web page to connect the exer-

cise bike console to your wireless network.

Note: A warning may appear stating that the server

cannot be identified. If this happens, make sure

that you have entered the IP address correctly.

Then, cycle the power of the exercise bike: unplug

the power adapter, wait for several seconds, and

then plug in the power adapter. Note: It may take a

few minutes for the console to be ready for use.

When the console is connected to a wireless

network,

the wireless symbol in the display will

stop flashing or filling and become solid. The wire-

less symbol will show the strength of your wireless

signal; four arcs indicate full signal strength.

If you cannot complete any part of this

process, or if you have any questions, go to

support.ifit.com for assistance.

6. Exit the information mode.

To exit the information mode, press Settings button.

HOW TO USE THE SOUND SYSTEM

To play music or audio books through the console

sound system while you exercise, plug a 3.5 mm male

to 3.5 mm male audio cable (not included) into the jack

on the console and into a jack on your MP3 player,

CD player, or other personal audio player;

make sure

that the audio cable is fully plugged in. Note: To

purchase an audio cable, see your local electronics

store.

Next, press the play button on

your personal audio player.

Adjust the volume level using the

volume increase and decrease

buttons on the console or the

volume control on your personal audio player.

THE OPTIONAL CHEST HEART RATE MONITOR

Whether your

goal is to

burn fat or to

strengthen

your cardiovas-

cular system,

the key to

achieving the

best results is

to maintain the

proper heart

rate during your workouts. The optional chest heart

rate monitor will enable you to continuously moni-

tor your heart rate while you exercise, helping you

to reach your personal fitness goals.

To purchase a

chest heart rate monitor, please see the front cover

of this manual.

Note: The console is compatible with all BLUETOOTH

®

Smart heart rate monitors.

NordicTrack Vr23 Bike English Manual - Page 27

How To Use The Sound System

Page 27 highlights