NordicTrack X22i Instruction Manual - Page 15
How To Use The Touch Screen
View all NordicTrack X22i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
HOW TO TURN ON THE POWER HOW TO USE THE TOUCH SCREEN IMPORTANT: If the incline trainer has been exposed to cold temperatures, allow it to warm to room temperature before you turn on the power. If you do not do this, you may damage the console displays or other electrical components. Plug in the power cord (see page 13). Next, locate the power switch on the incline trainer frame near the power D cord. Press the power switch into the reset position (D). Next, stand on the foot rails of the incline trainer. Locate the clip (E) attached to the key (F), and F slide the clip securely onto the waistband of your clothes. Then, E insert the key into the console. Note: It may take some time for the console to be ready for use. IMPORTANT: In an emergency, the key can be pulled from the console, causing the walking belt to slow to a stop. Test the clip by carefully taking a few steps backward; if the key is not pulled from the console, adjust the position of the clip. The console features a tablet with a full-color touch screen. The following information will help you become familiar with the tablet's advanced technology: • The console functions similarly to other tablets. You can slide or flick your finger against the screen to move certain images on the screen, such as the displays in a workout (see step 5 on page 17). However, you cannot zoom in and out by sliding your fingers on the screen. • The screen is not pressure sensitive. You do not need to press hard on the screen. • To type information into a text box, touch the text box to view the keyboard. To use numbers or other characters on the keyboard, touch the ?123 button. To view more characters, touch the ~[< button. Touch the ?123 button again to return to the number keyboard. To return to the letter keyboard, touch the ABC button. To use a capital character, touch the button with an upward-facing arrow. To use multiple capital characters, touch and hold the arrow button. To return to the lowercase keyboard, touch the arrow button again. To clear the last character, touch the button with a backward-facing arrow and an X. Note: The console can display speed and distance in either miles or kilometres. To find which unit of measurement is selected, see HOW TO CHANGE CONSOLE SETTINGS on page 21. For simplicity, all instructions in this section refer to kilometres. 15