Oki C8800n C8800 User Guide (Amer Eng) - Page 103

PCL Emulation Menu This menu controls settings effective when the printer is operating in PCL emulation mode. Notes: Factory default settings are shown in bold. Settings with a dagger (†) only appear when the appropriate option is installed. ItemS FONT SOURCE FONT No. FONT PITCH SYMBOL SET A4 PRINT WIDTH WHITE PAGE SKIP CR FUNCTION LF FUNCTION PRINT MARGIN Settings RESIDENT / DIMM0 / DIMM1 / DOWNLOADED I0/ C001 / S001 10.00CPI +/- PC-8 78 COLUMN 80 COLUMN OFF / ON CR / CR+LF LF / LF+CR NORMAL 1/5 INCH 1/6 INCH Explanation Specifies the location of the PCL default font. Normally this will be INTERNAL unless additional fonts are installed in the expansion ROM slot or additional fonts have been downloaded to RAM as permanent fonts. Sets the current default font number from the currently selected source, which could be internal (I), ROM slot (C) or downloaded (S). Sets the pitch in Characters per Inch in increments of .01CPI PCL symbol set. If the font source and number are changed to one which does not support the selected symbol set, this must be changed to an available symbol set for that font. Sets the number of columns subject to Auto LF with A4 paper in PCL. This is the value when Auto CR/LF Mode is set to OFF with the 10CPI character. Selects whether blank pages are printed or not. Selects whether a received carriage return character (0Dh) also causes a line feed. Selects whether a received line feed character (0Ah) also causes a carriage return. Sets the non-printable page area. NORMAL is PCL compatible. C8800 User's Guide 103