Oki C8800n C8800 User Guide (Amer Eng) - Page 93

Print Menu This menu provides adjustment of various print job related functions. Notes: Factory default settings are shown in bold. Settings with a dagger (†) only appear when the appropriate option is installed. Item Settings Explanation COPIES DUPLEX BINDING PAPER FEED AUTO TRAY SWITCH TRAY SEQUENCE MP TRAY USAGE MEDIA CHECK RESOLUTION 1-999 ON OFF LONG EDGE SHORT EDGE TRAY1 TRAY2 MP TRAY ON OFF DOWN UP PAPER FEED TRAY DO NOT USE WHEN MISMATCH ENABLE DISABLE 600DPI 600 x 1200DPI 600DPI M-LEVEL Enter the number of copies of a document to be printed from 1 to 999. Switches the Duplex (2 sided) function ON/OFF. Sets the default binding to SEF or LEF Selects the default tray for paper feed, Tray 1 (upper), Tray 2 (lower, if installed) or MP Tray (multi purpose tray). If two trays contain identical paper, the printer can switch to an alternative source when the current tray runs out in the middle of a print job. Determines tray sequence order when automatically switching. If a document to be printed demands a paper size not installed in the selected tray, the printer can automatically feed from the multi purpose tray instead. If this function is not enabled, the printer will stop and request the correct size of paper to be loaded. Determines whether the printer check the size of paper loaded matches that required for the document sent to print. Sets the default resolution for printing (dots per inch). 600x1200DPI uses more memory and requires more time to process, but prints at a higher quality. C8800 User's Guide 93