Oki C8800n C8800 User Guide (Amer Eng) - Page 145

Shading on unprinted sections Possible cause Remedy Paper has been affected Store paper within specified temperature and humidity by static electricity. levels. See "Specifications" on page 122. Paper is too thick. Use recommended paper. See "Paper (Print Media)" on page 11. Toner is low. Replace toner cartridge. See "Replace a Toner Cartridge" on page 71. Toner rubs off when you rub the printed surface. Possible cause Remedy Media Weight and Media Type settings may not be appropriate. Set the value of media weight in the menu to the next heaviest one (MEDIA MENU → YYY MEDIA WEIGHT). Packing materials were left on the fuser when it was installed. Careful! Fuser my be HOT! Open the top cover and check to be sure that all the packing materials were removed from the fuser. See "Replace the Fuser" on page 79. Ultra Heavy If the Ultra Heavy setting does not give proper toner fusion, you can try the Label settings. C8800 User's Guide 145