Oki C8800n C8800 User Guide (Amer Eng) - Page 111
Network Menu
View all Oki C8800n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Network Menu This menu controls the operation of the printer's 10Base-T/ 100Base-TX network interface. Notes: Factory default settings are shown in bold. Settings with a dagger (†) only appear when the appropriate option is installed. Item TCP/IP IP VERSION NETBEUI NETWARE ETHERTALK FRAME TYPE IP ADDRESS SET IP ADDRESS SUBNET MASK GATEWAY ADDRESS FACTORY DEFAULTS WEB Settings Explanation ENABLE / DISABLE Enables or disables this network protocol. IP V4 / IPV 4 & V6 ENABLE / DISABLE Enables or disables this network protocol. ENABLE / DISABLE Enables or disables this network protocol. ENABLE / DISABLE Enables or disables this network protocol. AUTO / 802.2 / 802.3 / ETHERNET II / SNAP Selects the Ethernet MAC layer frame type. AUTO / MANUAL Specifies whether IP address allocation is automatic (DHCP) or manually assigned. xxx.xxx.xxx.xxx Current assigned IP address. To change, press ENTER and use +/- keys to increment 1st octet, then press ENTER again to move on to next octet. When 4th octet has been set, press ENTER again to register new address. xxx.xxx.xxx.xxx Current assigned subnet mask. To change, proceed as above. xxx.xxx.xxx.xxx Current assigned gateway address. To change, proceed as above. EXECUTE Reloads the settings present when the unit was setup by the manufacturer. ENABLE / DISABLE Enables or disables Web config. facility. C8800 User's Guide 111