Oki C9600n Guide: Network User's, OkiLAN 8200e - Page 54

Reset, Test Print, IP Address Setup, Enter the [Ethernet Address] MAC Address and the [IP Address]

Page 54 highlights

c. When done, click [Quit] ᮣ Reset Resets the selected network interface card. ᮣ Test Print Prints the self-diagnostic test pages (see page 12). ᮣ IP Address Setup Sets the static IP address of the network interface card manually. If you only use TCP/IP and the print server has not yet been configured, occasionally it may not be displayed on AdminManager. You can configure the IP address of the print server by this function. 1. Enter the [Ethernet Address] (MAC Address) and the [IP Address], then click [OK]. NOTE The Ethernet (MAC) Address is displayed under "General Information" on the self-diagnostic test printout (see page 12). 2. AdminManager asks whether you want to initialize the network interface card or not. Select [Yes]. NOTE Even if you select [No] here, the IP address that you set can be used after turning the printer OFF and ON. The requirement to turn your printer OFF and ON is dependent on the network interface card. OkiLAN 8200e Network User's Guide 54

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264

OkiLAN 8200e Network User’s Guide
54
c.
When done, click [Quit]
±
Reset
Resets the selected network interface card.
±
Test Print
Prints the self-diagnostic test pages (see page 12).
±
IP Address Setup
Sets the static IP address of the network interface card manually. If
you only use TCP/IP and the print server has not yet been configured,
occasionally it may not be displayed on AdminManager. You can
configure the IP address of the print server by this function.
1. Enter the [Ethernet Address] (MAC Address) and the [IP Address],
then click [OK].
2. AdminManager asks whether you want to initialize the network
interface card or not. Select [Yes].
NOTE
The Ethernet (MAC) Address
is displayed under
“General Information” on the self-diagnostic test
printout (see page 12).
NOTE
Even if you select [No] here, the IP address that you
set can be used after turning the printer OFF and ON.
The requirement to turn your printer OFF and ON is
dependent on the network interface card.