Oki MB260MFP MB260 MFP User Guide (English) - Page 16
Starting your device, Paper insertion in the manual input
View all Oki MB260MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Installation MB260 Starting your device Device connection Before plugging the power cord, it WARNING is imperative to refer to the Safety booklet. 1 Make sure that the On/Off switch is on Off (O position). 2 Connect the power cord to the device. Plug the power cord to outlet on the wall. 1 Select the desired language using the " or ! buttons and confirm with OK. The setup is now complete and the functions list is automatically printed out. The LCD screen displays the message PAPER EMPTY if no paper has been loaded in the paper tray (see Loading paper in the main unit tray, page 10). Once paper has been loaded, printing will resume. Paper insertion in the manual input tray Before inserting paper, refer to the Important paragraph Paper recommendations, page 10. The manual input tray allows you to use various paper formats with greater grammage than the one used in the paper feed cassette (refer to the paragraph Specifications, page 46). Only one sheet or envelope can be fed at a time. Important You can use paper weighing between 52 and 160 g/m². 1 Spread the manual feed guides to the maximum. WARNING The power cord is used as a power unit cut off. As a precaution, the outlet shall be located close to the device and be of easy access in case of danger. 3 Press the On/Off button to turn on the device (I position). Device initial setup After a few seconds, when the machine has warmed up, the Easy Install function is launched and the LCD screen displays the following message: 1 - FRANCAIS 2 - ENGLISH The Easy Install function will help you configure your machine by guiding you through the basic settings. If you wish to modify the setting displayed, press the OK button. If you do not want to modify the displayed setting, press the C button: the Easy Install function then displays the next basic setting. Note If you do not want to carry out the initial setup, press the button. A confirmation message appears. Press the button again to confirm. To manually modify and customise the machine settings, refer to Parameters/Setup, page 22. 2 Insert a sheet or an envelope in the manual input tray. 3 Adjust the paper guides against the right and left edges of the sheet or the envelope. 4 Print making sure that the chosen paper format corresponds to the selected format on the printer (refer to Copy, page 18). Use of envelopes • Feeding can be done only through the manual feed. • Recommended area should be the area which excludes 15 mm from the leading edge, 10 mm from both the left and right edges, and the rear edge. • A few lines may be given in solid print at the part of being overlapped. • Envelopes which are not recommended may lead to improper printing (refer to the paragraph Specifications, page 46). • Curled envelope after printing should be fixed manually. • Small crumples on the edge of the wide side of envelopes, smearing, or less clear printing may - 16 -