Oki MB260MFP MB260 MFP User Guide (English) - Page 35
Connections
![]() |
View all Oki MB260MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
The following screen appears: MB260 1 Locate your USB cable connectors and connect as shown below on the picture. PC Features 4 Open the CD-ROM drive, insert the installation CDROM and close the drive. The drivers are detected automatically. 5 Select OKI MB260 in the list and click on NEXT. 2 Power on your multifunction machine. The PC detects the device and the drivers are automatically installed. 3 Once the installation is finished, a message indicates that the drivers are installed correctly. 6 A screen informs you that the drivers have been installed. Click on the CLOSE button. You can now use the multifunction machine to print or scan your documents. Connections Make sure that your multifunction machine is powered off. The connection between the PC and the machine requires a USB 2.0 shielded cable no more than 3 meters long. You can now use the multifunction machine to print or scan your documents. It is recommended to install the Companion Suite Pro software first and then to connect the USB cable to your machine (see Installing the full software package, page 32). Important If you connect the USB cable before installing the Companion Suite Pro software the recognition system (plug and play) identifies automatically that new hardware has been added. To start your machine drivers installation, refer to paragraph Installing the drivers manually, page 34 and follow the instructions on screen. When you use this procedure, only printing and scanning functions are activated. - 35 -
![](/manual_guide/products/oki-data-mb260mfp-mb260-mfp-user-guide-english-7b3842f/35.png)