Oki MB260MFP MB260 MFP User Guide (English) - Page 19

Copy MB260 2 Enter the desired number of copies and confirm with the OK button. 3 Choose the paper tray AUTOMATIC or MANUAL with the buttons " or !, then confirm with the OK button. Important Copying in ID Card mode is only possible on A4 (original document size < A5) or Letter (original document size < Statement) paper size. Make sure that the selected paper tray uses the correct paper size. 4 Choose the copying option ID CARD with the buttons " or ! and confirm with the OK button. 5 Choose the resolution depending on the desired printing quality AUTO, TEXT, QUALITY TEXT or PHOTO with the buttons " or !, then confirm with the OK button. For optimal results with ID documents, select the PHOTO resolution. 6 Adjust the contrast level with the buttons " or !, then confirm with the OK button. 7 Adjust the desired brightness level with the buttons " or !, then confirm with the OK button. 8 Choose the paper type NORMAL, THICK with the buttons " or !, then confirm with the OK button. The LCD screen displays the following message: PUT ID CARD THEN OK 9 Place your identity card or any other official document against the glass of the flatbed scanner, as shown below: Special setup for the copying Setups done through this menu become the device default setups after you confirm. Important When the quality of the printing is not satisfying, you can proceed to a calibration (see Calibrate your scanner, page 23). Resolution setup The RESOLUTION parameter allows you to setup the photocopy resolution. ! 841 - ADVANCED FCT/COPY/RESOLUTION 1 Press !, enter 841 using the keypad. 2 Choose the resolution with the buttons " or ! according to the following table: Parameter Signification Icon AUTO Low resolution. none TEXT Standard resolution for documents containing text and graphics. QUALITY Optimal resolution for TEXT documents containing text. PHOTO Optimal resolution for documents containing photographies. 3 Confirm your choice by pressing the OK button. 4 Quit this menu by pressing the button. Note You can also change the resolution by pressing the button. 10 Press the OK button. The document is scanned then the LCD screen displays the following message: TURN UP DOC THEN OK 11 Turn your document over then confirm with the OK button. The machine prints out a copy of your document. Zoom setup The ZOOM parameter allows you to reduce or enlarge an area of a document by choosing the origin and the zoom level to apply to the document, from 25 to 400 %. ! 842 - ADVANCED FCT/COPY/ZOOMING 1 Press !, enter 842 using the keypad. 2 Enter the desired zoom level with the alphanumerical keypad or choose among predefined values with the buttons " and !. 3 Confirm your choice by pressing the OK button. 4 Quit this menu by pressing the button. - 19 -