Oki MICROLINE 1120 Users Guide 2 - Page 32
Emoving, Continuous, Forms
View all Oki MICROLINE 1120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
(b) To retract the forms, continue to hold down the TEAR button and the LF/FF button. NOTE If a movement greater than +- 0.18 mm (1/144 in) for ML1120 and +-0.14 mm (1/180 in) for ML1190 is specified, the above adjustment cannot be made. 4. Release the buttons after the tear-off perforations have been aligned with the paper cutter. Removing continuous forms 1. Tear off the continuous forms. See "Tearing off continuous forms" on page 31. 2. Press the SEL button to set the printer off-line and reposition the continuous forms in the printer. 3. Press the LOAD/EJECT button to move the front edge of the continuous forms backwards to the Pin Tractors. NOTE If sprocket holes of the last page of the forms disengage from the sprocket pins, do not attempt to eject the paper to avoid the possibility of a paper jam. 4. Remove the Input Tray by gripping it at both sides and pulling it up and away from the printer. ML1120/ML1190 User's Guide - Paper handling > 32