Oki MICROLINE 1120 Users Guide 2 - Page 65
Load/eject.
View all Oki MICROLINE 1120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Adjusting TOF position Use the following procedure to set TOF to accord with the reference position (23.28 mm (11/12 in)). The reference position refers to the first line of the paper i.e. the position to which the printer feeds the paper when automatically loading the paper. NOTE Adjusting of TOF can be done in cut sheet mode or continuous forms mode. 1. Print out the menu settings of the printer as in "Confirming current settings" on page 47 and confirm that the TOF (in cut sheet mode or continuous forms mode) is 23.28 mm (11/12 in). 2. Set the Paper Type lever to the required paper type. 3. When continuous forms are used, place the paper on the Pin Tractor. For cut sheet mode, do not insert the paper at this stage. 4. In continuous forms mode, press the LOAD/EJECT button. In cut sheet mode, place the paper in the Paper Tray and press LOAD/EJECT. 5. Press the following buttons to adjust the first printing line: To feed the paper forward by a small amount, press and hold down the LOAD/EJECT button and then press the SEL button. To feed the paper backward by a small amount, press and hold down the LOAD/EJECT button and then press the LF/FF button. NOTE If the specified correction range is more than +- 3.53 mm (20/144 in) for ML1120 and +- 4.23 mm (30/180 in) for ML1190, the paper cannot be moved. When the paper is positioned at the required TOF, release the buttons in Step 5 above. NOTE Do not turn the Platen Knob or switch off the printer during the above procedure. ML1120/ML1190 User's Guide - Operating instructions > 65