Oki MICROLINE 621 Users Guide - Page 25
Ejecting Cut Sheet Paper, Notes on Different Types of Paper, Glossy paper, Seal-type cards, Labels
View all Oki MICROLINE 621 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Ejecting Cut Sheet Paper When the printer reaches the end of the cut sheet page it automatically ejects the page. If required, add another sheet for the printer to continue printing from where it left off. To eject a cut sheet left in the printer, follow these steps: 1. Press the SEL button to take the printer off-line. . Press LOAD/EJECT to eject the paper to the paper tray. Notes on Different Types of Paper Narrow paper: When printing on very narrow paper (e.g., three inches), change the Centering position (see the Menu Settings Table in Chapter 3) to "Mode1". Failure to change the Centering position can result in paper jams. Envelopes: When printing envelopes be sure to adjust the Paper Thickness Lever to include the thickness of the overlapped and glue parts of the envelope - that is, the maximum thickness. If the Paper Thickness Lever is set for the thinnest part of the envelope the print density may fluctuate. Glossy paper: Test paper with a glossy finish thoroughly before using. A glossy surface can absorb marks from the paper feed roller or from rubbing. Also, glossy paper may slip causing erratic line spacing. Seal-type cards: Test seal-type cards thoroughly before using. This type of card can cause ink to transfer. Labels: Always feed labels from the FRONT - never from the top - labels fed from the top will peel off, causing paper jams. The adhesive strength of labels can vary - if the adhesive is not strong enough labels can peel off and cause jams. Do not use labels on individual sheets. ML620/ML621 User's Guide 25