Oki MICROLINE 621 Users Guide - Page 35
Print Quality, Draft: Utility-the default, HSD: High Speed Draft, NLQ: Near Letter Quality
View all Oki MICROLINE 621 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Print Quality Important! Front panel settings for print quality and character pitch are normally overridden by software commands. Draft: Utility-the default Medium quality, medium speed (380 cps) Gothic typeface only HSD: High Speed Draft Lower quality, higher speed (507 cps) Gothic typeface only SSD: Super Speed Draft Lowest quality, highest speed (570 cps) Gothic typeface only NLQ: Near Letter Quality Highest quality, slowest speed (95 cps) Courier or Gothic Note: Available Print Quality settings depend on which Character Pitch setting is selected. There are three PRINT QUALITY indicator lights: The sequence of lights shows which print quality setting is active: SSD HSD Draft Courier Gothic OCR-B ( = light off, = light on) The default PRINT QUALITY is "DRAFT." To change the PRINT QUALITY press the PRINT QUALITY key. Each time the key is pressed the light sequence above the PRINT QUALITY key changes until all the options have been cycled through. ML620/ML621 User's Guide 35