Olympus PT-038 PT-038 Underwater Housing Instruction Manual (16.4 MB) - Page 56

Load the digital camera. 1 Confirm that the digital camera is OFF. 2 Set the mode dial of the digital camera to "SCENE" and gently insert the digital camera into the Case. EN CAUTION: If the digital camera is not inserted properly, it may not be possible to seal the case so that it is airtight. Alternatively, some controls may become inoperable. Note that imperfect sealing may result in water leakage. Insertion of silica gel Before sealing the Case, insert the silica gel bag provided for prevention of fogging between the bottom of the camera and the Case. Pay attention to the orientation. CAUTION: • Insert the silica gel all the way at the specified location and with the specified orientation. When the orientation is not correct, the silica gel bag will be caught when the Case is sealed and water leakage will occur. • If the Case is sealed without inserting the silica gel fully, the silica gel bag will be caught by the O-ring and water leakage will occur. • Once silica gel has been used, the moisture absorption performance will be impaired. Always replace the silica gel when the Case is opened and closed. EN 18