Olympus PT-038 PT-038 Underwater Housing Instruction Manual (16.4 MB) - Page 57

Make sure the camera is loaded properly. Check the following points before sealing the Case. • Is the digital camera loaded properly? • Is the mode dial set to "SCENE"? • Is silica gel inserted all the way at the specified location? • Is the O-ring attached properly to the opening on the Case? • Is there any dirt or foreign matter on the O-ring or the O-ring contact surface on the front lid? • Is the waterproof function maintenance performed? EN Seal the Case. 1 Close the rear lid of the Case gently. 2 Turn the open/close dial clockwise. • The Case is sealed when the dial is turned 180 degrees. CAUTION: • If the open/close dial is not fully turned, the Case will not be sealed. This will cause water leakage. • Close the rear lid of the Case so that the lens cap strap doesn't catch. If it catches, water leaks may result. EN 19