Olympus PT-038 PT-038 Underwater Housing Instruction Manual (16.4 MB) - Page 68
Remove any sand, dirt, etc.
UPC - 050332160354
View all Olympus PT-038 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Remove any sand, dirt, etc. After visually checking that dirt has been removed from the O-ring, checks for sand and other foreign matter adhered, damage and cracks can be done by squeezing the entire circumference of the O-ring lightly with your fingertips. EN Remove any foreign matter adhered to the O-ring groove using a lint-free clean cloth or cotton swab. Also remove any sand or dirt adhered to the O-ring contact surface on the front lid of the case. CAUTION: • Maintenance of the waterproof functions is required even before using this product underwater for the first time. • When a mechanical pencil or a similar sharp object is used to remove the O-ring or to clean the inside of the O-ring groove, the Case and the O-ring may be damaged and water leakage may occur. • When the O-ring is checked with the fingertips, take care not to stretch the O-ring. • Never use alcohol, thinner, benzene or similar solvents or chemical detergents to clean the O-ring. When such chemicals are used, the O-ring may be damaged or its deterioration will be accelerated. EN 30