Olympus SP 570 SP-570UZ Instruction Manual (English) - Page 43

QFLASH Setting to use an external flash INT/EXT #RC SLAVE Allows you to take pictures using the built-in flash or a dedicated external flash. g "External flash shooting" (P.82) Allows you to take pictures using a flash that is compatible with the Olympus wireless RC flash system. g "Shooting with the Olympus wireless RC flash system" (P.84) When using a commercially available slave flash that is synchronized with the camera flash, the amount of the light emitted by the flash can be adjusted in 10 levels. Selecting an emission level • When flash is set to [SLAVE], flash mode automatically changes to [#] (Fill-in flash) for all flash modes except [$] (Flash off). SLAVE FLASH 1 Press 12 to select an emission level from [1] to [10], then press o. The bigger number indicates the bigger amount of light emitted by the flash. • The flash can fire in sequential shooting mode, but the interval between shots will be longer if a high emission level is set. BACK MENU SET OK R (still pictures Recording sound with still pictures OFF /ON It automatically starts recording for about 4 seconds after shooting pictures. When recording, aim the camera microphone at the source of the sound you want to record. Adjusting the white balance compensation > BACK MENU BLUE RED SET OK • The white balance can be adjusted in 7 increments in both the [BLUE] and [RED] directions. 1 : Each press makes the color more blue. 2 : Each press makes the color more red. Press o after setting is complete. PICTURE MODE Adjusting the color tone of the image VIVID NATURAL Produces vivid colors. Produces natural colors. Menu operations EN 43