Olympus VP-1 VP-1 User's Manual - Simplified Edition (English) - Page 16

Operating 1 Set up the screen and the projector See "Projection Distance Table" on Page E- 11(S) for the distance between the screen and the projector. 2 Connect the personal computer or video equipment to the projector 3 Connect the AC IN connector of the pro- jector and the power outlet using the supplied power cable. The POWER indicator will light amber, the cooling fan will rotate at low speed, and the unit will enter the standby mode. To wall outlet Firmly plug in all the way. AUDIO VIDEO POWER STATUS POWER SOURCE MENU MEQNUUICK AUTO PC 4 Turning on the projector power Main unit operation: Press and hold the POWER button for 1 second. Remote control operation: Press the POWER ON button. ON POWER OFF STATUS POWER POWER STATUS POWER Blinks green (Approximately 60 seconds) STATUS POWER Lit green Power is on The POWER indicator changes to a blinking green and lights steadily after about 60 seconds. The projection screen brightens after about 40 seconds. The projector is now capable of regular projection. 5 Switch on the power of the connected equipment 6 Select the input Main unit operation: Press the SOURCE button. Remote control operation: Press the desired button from among the input selection buttons. E-16