Olympus VP-1 VP-1 User's Manual - Simplified Edition (English) - Page 38
Install the lamp cover, Reset the lamp timer to zero., Install the new lamp cartridge - vp 1
![]() |
UPC - 050332147072
View all Olympus VP-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Replacing the Lamp Cartridge 5 Install the new lamp cartridge (1) Slowly push in the lamp cartridge with the socket facing forward. (Align the lamp cartridge screw with the screw hole of the projector.) (2) Turn the 2 screws of the lamp cartridge clockwise to tighten. 6 Install the lamp cover (1) First insert the front edge of the lamp cover (2) Turn the screw of the lamp cover clockwise to into the groove, then close the lamp cover. tighten. 7 Reset the lamp timer to zero. Plug in the power cable and switch on the power before resetting. Select [Info.] → [Lamp Timer Reset] and then reset the hours indication. See Page E-59(C). Note The projector will no longer start when the lamp timer exceeds 1100 hours. As a result, it will not be possible to reset the lamp timer through timer operations. Should this situation arise, set to the standby condition and press the SOURCE button and the ASPECT button of the main unit at the same time for at least 5 seconds. When reset, the STATUS indicator will go off. Please obtain a replacement lamp from Olympus Emporium. When ordering, please specify a VP-1 replacement lamp type V-120 (Stock No. 205201). E-38
![](/manual_guide/products/olympus-vp1-vp1-users-manual-simplified-edition-english-b386304/38.png)