Olympus VP-1 VP-1 User's Manual - Simplified Edition (English) - Page 20

General Operation This section describes the use of direct operation with the main unit or remote control buttons. For information about operation using the menu, see "Menu Operation Method" on Page E37(C) and the various items on Pages E-46(C) to E-60(C). Input Selection This operation selects the input signal to be projected. Main unit operation: Press the SOURCE button. (It will not function while the menu or the quick menu is displayed.) When Auto Source is On If there is no input signal at the source that was previously used, the projector automatically selects the next source that has an input signal. When Auto Source is Off Each press of the button switches the selection one step in the sequence of Analog RGB → YPbPr → Digital RGB → VIDEO → S-VIDEO → YCbCr. Remote control operation: Press the desired input selection button. When Auto Source is On When an input signal is not present at the selected source, the projector automatically selects the next source that has an input signal. When Auto Source is Off The projector switches to the selected source regardless of whether an input signal is present. MENU SOURCE AUTO QUICK MENU ON POWER FREEZE MUTE DIGITAL RGB VIDEO S-VIDEO QUICK ASPECT OFF PIP YPbPr YCbCr AUTO Note * When you do not operate source selection, the projector will assume the input selection condition that was previously used. * See "Auto Source" on Page E-55(C) for information about the Auto Source on and off conditions. * YPbPr input selection cannot be used when YPbPr is set to "Disable". See "YPbPr" on Page E-57(C). E-20