Olympus VP-1 VP-1 User's Manual - Simplified Edition (English) - Page 31

When the STATUS Indicator is Lit/Blinks STATUS indicator When the STATUS indicator of the main unit operation panel is lit or blinks, notification is being given of the irregularities described. AUDIO VIDEO POWER STATUS POWER SOURCE POWER indicator MENU MEQNUUICK AUTO STATUS Indicator POWER Indicator Action to Take STATUS Blinks red (0.5 s lit / 0.5 s off) POWER Lit red The temperature has become abnormally high. * The thermal protector is activated. If the room temperature is high, move the projector to a cool location. If the internal temperature of the projector is high, check the ventilation holes of the cooling fan and clean them if they are obstructed. * When the thermal protector is activated, the power is switched off and even if the power is soon switched back on, the power might not actually be supplied to the projector. Should this happen, wait one minute and then switch the power on again. If the power still does not come on, wait approximately 60 minutes until the internal temperature of the projector drops, then switch on the power again. When the aforementioned procedure does not solve the problem, please contact Olympus Digital Technical Support. STATUS Blinks red (1 s lit / 1 s off) POWER The lamp will not light up. Wait one minute or longer while the lamp lighting voltage irregularity detection protector is activated and switch the power on again. If the problem still persists, unplug the power cable and contact Olympus Digital Technical Support. When the lamp burns out during operation: Blinks amber for 90 seconds and then is lit amber When the lamp does not light from the beginning: Lit amber E-31