Olympus iS-20 IS-20 DLX Instruction Manual (2 MB) - Page 57

camera again. Strong electrical fields can, also interfere with the operation of - manuals

Get Olympus iS-20 - QD Date 35mm SLR Camera PDF manuals and user guides
UPC - 050332127395
View all Olympus iS-20 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

Keep your hair, hands, strap, etc. away from the autofocus window, lens, AE sensor and flash. Avoid leaving the camera unused for long periods of time. This can cause mold to grow on the camera as well as other problems. Try to press the shutter release button and check the operation of the camera before use. Be careful when moving the camera on a tripod. Some airport X-ray machines can damage the film in your camera. Try to avoid passing your camera through these machines. Give it to the security officer for manual inspection. Do not touch the contact points inside the camera. This camera is controlled by a microcomputer. Problems with the microcomputer can affect or stop camera operation, If this happens, remove the batteries, then reload them and try the camera again. Strong electrical fields can also interfere with the operation of this camera, so try to avoid places or objects that generate such fields. This camera is not suitable for use under severe conditions. Do not touch the front surface of the flash after using the flash continuously in a short time as the flash may be hot. 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
Keep your hair, hands, strap, etc. away from
the autofocus window, lens, AE sensor and
flash.
Avoid leaving the camera unused for long
periods of time. This can cause mold to grow
on the camera as well as other problems. Try
to press the shutter release button and check
the operation of the camera before use.
Be careful when moving the camera on a
tripod.
Some airport X-ray machines can damage
the film in your camera. Try to avoid passing
your camera through these machines. Give it
to the security officer for manual inspection.
Do not touch the contact points inside the
camera.
This camera is controlled by a
microcomputer. Problems with the
microcomputer can affect or stop camera
operation, If this happens, remove the
batteries, then reload them and try the
camera again. Strong electrical fields can
also interfere with the operation of this
camera, so try to avoid places or objects that
generate such fields.
This camera is not suitable for use under
severe conditions.
Do not touch the front surface of the flash
after using the flash continuously in a short
time as the flash may be hot.
57