Olympus iS-20 IS-20 DLX Instruction Manual (2 MB) - Page 60
be released by, Preferred Auto mode.
UPC - 050332127395
View all Olympus iS-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Symptom The camera doesn't focus on the subject even though the auxiliary flash lights. The shutter doesn't release even when the shutter release button is pressed. The flash doesn't fire blinks in the viewfinder. The shutter cannot be released by remote control. Cause The autofocus may not work when the subject is out of the auxiliary flash's working distance (approx. 75cm~5m/ 2.5ft~1 6.4ft). The subject is not in focus. The rewound film is still loaded. The shutter speed is set at faster than 1/100-sec. High-speed film is used. Exposure is incorrect in the AperturePreferred Auto mode. If no operations have been carried out in the Selftimer/Remote Control mode for about 20 minutes, the LCD panel turns off and the shutter can't be released with the remote control. Remedy See Move the camera closer to the subject. Make sure the subject is in focus p.23 and the autofocus indicator in the viewfinder lights. Remove the film. p.25 Set the flash mode to Fill-in. p.31 Set the flash mode to Fill-in. p.31 Change the aperture until p. 38 stops blinking. Use the flash when available light is insufficient. Press the FULL AUTO button to turn on the LCD panel, and engage the Selftimer/Remote Control mode again. 60