Onkyo PR-SC885 Owner Manual - Page 108
Lock Setup, Network
View all Onkyo PR-SC885 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Advanced Setup-Continued • HDMI power control only works with HDMI-compatible components that support it and may not work properly with some components due to their settings or compatibility. • When set to Enable, the AV controller consumes more power. • When set to Enable, the AV controller enters Ready mode when set to Standby. Also, the AV controller's AC outlets will be on all of the time regardless of whether the AV controller is set to On or Standby, or Ready mode in this case. TV Control Select Enable to control the AV controller from an RIHD-compatible TV connected via HDMI. Disable: TV Control disabled. Enable: TV Control enabled. Notes: • Select Disable if your TV is incompatible or you're note sure about its compatibility. • The TV Control setting can be set only when the above Control and Power Control settings are both set to Enable. Note: • After changing the Control, Power Control, or TV Control setting, be sure to turn all of your components off and then back on again. Refer to the instruction manuals for your other components. Network These settings are for use with home automation equipment and external controllers. Lock Setup Lock With this setting, you can protect your settings by locking the setup menus. Locked: Setup menus locked. Unlocked: Setup menus unlocked. When Locked is selected, only this Lock Setup item can be accessed. 108