Onkyo PR-SC885 Owner Manual - Page 47
HDMI Input Setup, HDMI OUT SUB, the HDMI Monitor setting must
View all Onkyo PR-SC885 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
First Time Setup-Continued HDMI Input Setup 2, 3 1, 5 1 DVD TV DIMMER + CH DISC ALBUM - PREV CH DISPLAY 2 3 REMOTE MODE VCR CD CDR/MD ZONE3 ZONE2 CABLE SAT TOP MENU DOCK MENU RECEIVER TAPE/AMP SLEEP ENTER VOL GUIDE SETUP EXIT RETURN MUTING 1 2-4 3 ENTER ENTER Use the Up and Down [ ]/[ ] buttons to select "2. HDMI Input," and then press [ENTER]. The HDMI Input menu appears. 1-2.HDMI Input DVD --- VCR/DVR --- CBL/SAT --- GAME/TV --- AUX1 --- AUX2 --- If you connect a video component to an HDMI IN, you must assign that input to an input selector. For example, if you connect your DVD player to HDMI IN 1, you must assign HDMI IN 1 to the DVD input selector. By default, none of the HDMI inputs are assigned. The following input selectors can be assigned: DVD, VCR/DVR, CBL/SAT, GAME/TV, AUX 1, AUX 2. If you've connected your TV to the AV controller with an HDMI cable, you can set the AV controller so that composite video, S-Video, and component video sources are upconverted (*) and output by the HDMI outputs. You can set this for each input selector by selecting the "- - -" option. Composite video, S-Video, component video IN HDMI (*) OUT Composite video, S-Video, component video HDMI 1 RECEIVER Press the [RECEIVER] button, followed by the [SETUP] button. The main menu appears onscreen. SETUP 2 ENTER ENTER Use the Up and Down [ ]/[ ] buttons to select "1. Input/Output Assign," and then press [ENTER]. The Input/Output Assign menu appears. 4 ENTER ENTER 5 SETUP Use the Up and Down [ ]/[ ] buttons to select an input selector, and use the Left and Right [ ]/[ ] buttons to select: IN1: Select if the video component is connected to HDMI IN 1. IN2: Select if the video component is connected to HDMI IN 2. IN3: Select if the video component is connected to HDMI IN 3. IN4: Select if the video component is connected to HDMI IN 4. - - -: Select this to upconvert and output composite video, S-Video, and component video sources from the HDMI OUT. Press the [SETUP] button. Setup closes. Notes: • Each HDMI IN cannot be assigned to more than one input selector. • For composite video, S-Video, and component video upconversion for the HDMI OUT MAIN or HDMI OUT SUB, the HDMI Monitor setting must be set to Main or Sub (see page 45). See page 27 for more information on video signal flow and upconversion. • When an HDMI IN is assigned to an input selector as explained here, the digital audio input for that input selector is automatically set to the same HDMI IN. See "Digital Input Setup" on page 49. • This procedure can also be performed on the AV controller by using its [SETUP], [ENTER], and arrow buttons. 47