Onkyo TX-DS747 Owner Manual - Page 12

Audio equipment connections Turntable O 0 PHONO OUT • On each pair of connectors, the lower connector (marked R, red) corresponds to the right channel, and the upper connector (marked L, white) to the left channel. • Please refer to the instruction manual of each component when you make any connections. • This receiver is designed for use with a turntable that employs moving magnet cartridges. CD Player o O 000 =I 1 0.= 000 000 00 OUTPUT 1=0=0.1=1 See pages 20 and 21 See page 11 A CD player, MD recorder. DAT deck or other component equipped with an optical or coaxial digital output connector can be connected to the TX-DS747. Even when one of these connectors are being used, do not disconnect the analog connection cable. °XXVI]. IV OUT -o oo O1 ..©REMOTE CONTROL -;i„. (Doe 0 0 0 C)CDHCCj X A X Avi0 0 0 c.p.))0 0 0 0 0 0 ,EE- VIDEO FI ICI ill ~l LINE IN LINE OUT I 000 o I o O O Tape Deck LINE IN IT LINE OUT 00 0 =i=====i O0O 0. 0 Tape Deck To wall outlet Caution: Do not plug in the power cord until all connections are made. • The FRONT SPEAKERS-B connectors are for use with normal stereo speakers, not surround speakers. • The SURROUND SPEAKERS and CENTER SPEAKER connectors should be used with the FRONT SPEAKERS-A connectors. • When you set the speaker system parameters (refer to "Setting System Setup A- on page 26), the crossover frequency is set auto- matically for the front speakers and subwoofer. • The cooling tan that equips this unit operates to cool down the heat only when the sound volume from the surround channels is high. The fan does not operate when the front speakers output a loud sound. 12