Onkyo TX-NR5010 Owner Manual - Page 65

Component Video Input If you connect a video component to a component video input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to COMPONENT VIDEO IN 2, you must assign "IN2" to the "BD/DVD" input selector. If you've connected your TV to the AV receiver with a component video cable, you can set the AV receiver so that composite video source is upconverted* and output by the COMPONENT VIDEO MONITOR OUT*1. You can set this for each input selector by selecting the option. Composite video Component video IN Composite video OUT Component video *1 This applies only when "Monitor Out" setting is set to "Analog" (➔ page 63). Here are the default assignments. Input selector BD/DVD CBL/SAT STB/DVR GAME1 GAME2 PC AUX TV/CD PHONO Default assignment IN1 IN2 ■ BD/DVD, CBL/SAT, STB/DVR, GAME1, GAME2, PC, AUX, TV/CD, PHONO ` IN1, IN2: Select the input to which the component has been connected Output composite video sources from the HDMI output. Note • For composite video upconversion for the COMPONENT VIDEO MONITOR OUT, the "Monitor Out" setting must be set to "Analog" (➔ page 63), and the "Component Video Input" setting must be set to See "Connection Tips and Video Signal Path" for more information on video signal flow and upconversion (➔ page 111). Digital Audio Input If you connect a component to a digital audio input, you must assign that input to an input selector. For example, if you connect your CD player to the OPTICAL IN 1, you must assign "OPTICAL1" to the "TV/CD" input selector. Here are the default assignments. Input selector BD/DVD CBL/SAT STB/DVR GAME1 GAME2 PC AUX TV/CD PHONO Default assignment COAXIAL1 COAXIAL2 COAXIAL3 OPTICAL1 --------FRONT (Fixed) OPTICAL2 ----- Advanced Operations ■ BD/DVD, CBL/SAT, STB/DVR, GAME1, GAME2, PC, TV/CD, PHONO (TX-NR5010) `COAXIAL1, COAXIAL2, COAXIAL3, OPTICAL1, OPTICAL2, OPTICAL3: (TX-NR3010) `COAXIAL1, COAXIAL2, COAXIAL3, OPTICAL1, OPTICAL2: Select the input to which the component has been connected. `- - - - -: Select if the component is connected to an analog audio input. Note • When an HDMI IN is assigned to an input selector in "HDMI Input" (➔ page 64), the same HDMI IN will be set as a priority in this assignment. In this case, if you want to use the coaxial or optical audio input, make the appropriate selection in the "Audio Selector" (➔ page 80). • Supported sampling rates for PCM signals (stereo/mono) from a digital input (optical and coaxial) are 32/44.1/48/88.2/96 kHz/16, 20, 24 bit. • "AUX" is used only for input from the front panel. En-65