Onkyo TX-NR636 User Manual - Page 24
Speaker Setup - subwoofer
View all Onkyo TX-NR636 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
2.Speaker Setup Allows you to change the speaker configuration such as existence of subwoofer, crossover frequency, and so on. Settings are automatically configured if you use the Automatic Speaker Setup. Furthermore, you will not be able to select this setting if you have a pair of headphones connected or you are listening through your TV speakers. Speaker Settings Change the impedance of the connected speakers, the type of front speaker connection, and other speaker settings. Setting item Speaker Impedance (European, Australian and Asian models) Front Speakers Type Powered Zone 2 Default Value 6ohms Normal No Setting Details Set the impedance of the connected speakers. "4ohms": When any of the connected speakers have 4 Ω or more to less than 6 Ω impedance "6ohms": When the connected speakers all have 6 Ω or more impedance Select the type of front speaker connection. "Normal": When front speakers are connected in a normal manner "Bi-Amp": When front speakers are bi-amp connected Set presence of speaker terminal connection of Zone 2 "Yes": When speakers are connected to ZONE2 speaker terminals "No": When speakers are not connected to ZONE2 speaker terminals • If "Front Speakers Type" is set to "Bi-Amp", this setting will be set to "No". • For impedance, check the indications on the back of the speakers or their instruction manual. Advanced Settings Speaker Configuration Allows you to change the speaker configuration such as presence or not of each speaker, crossover frequency, and so on. Settings are automatically configured if you use the Automatic Speaker Setup. Audio will not be output while you are making this setting. Setting item Subwoofer Front Center Surround Default Value Yes 100Hz 100Hz 100Hz Setting Details Set whether a subwoofer is connected or not. "Yes": When subwoofer is connected "No": When subwoofer is not connected Select the frequency to start outputting bass frequencies (crossover frequency) for each channel from "40Hz" to "200Hz". "Full Band": Full band will be output. "None": When no compatible speaker is connected • "Front" will be fixed to "Full Band" if "Subwoofer" is set to "No", and the bass frequencies of the other channels will be output from the front speakers. To make the settings, refer to the instruction manual of the speakers used. Select the frequency to start outputting bass frequencies (crossover frequency) for each channel from "40Hz" to "200Hz". "Full Band": Full band will be output. "None": When no compatible speaker is connected • This setting cannot be set to "Full Band" unless "Front" is set to "Full Band". Select the frequency to start outputting bass frequencies (crossover frequency) for each channel from "40Hz" to "200Hz". "Full Band": Full band will be output. "None": When no compatible speaker is connected • This setting cannot be set to "Full Band" unless "Front" is set to "Full Band". 24