Onkyo TX-NR636 User Manual - Page 38

Bluetooth Setting item Bluetooth Direct Change Auto Reconnect Wakeup via Bluetooth Default Value On On On Off Setting Details Select whether or not to use the Bluetooth function. "On": Enables connection with a Bluetoothenabled device by using the Bluetooth function. Select "On" also when making various Bluetooth settings. "Off": When not using the Bluetooth function The input of the unit will automatically be switched to "BLUETOOTH" when connection is made from a Bluetooth-enabled device to the unit. "On": The input will automatically become "BLUETOOTH" when a Bluetooth-enabled device is connected. "Off": The function is disabled. • If the input is not switched automatically, set to "Off" and change the input manually. This function automatically reconnects to the Bluetooth-enabled device connected last when you change the input selector to "BLUETOOTH". "On": Use this function "Off": Do not use this function • This function may not work depending on your Bluetooth-enabled device. This function wakes up the unit on standby by connecting a Bluetooth-enabled device. "On": Use this function "Off": Do not use this function • Setting to "On" increases the power consumption even when the unit is on standby. However, the increase in power consumption is kept to a minimum by automatically entering the HYBRID STANDBY mode, where only the essential circuit is operating. • "Wakeup via Bluetooth" is fixed to "Off" if "Direct Change" is set to "Off". Setting item Pairing Information Device Status Default Value - - - Advanced Settings Setting Details When paring is performed, the information of the previous pairing stored in this unit will be initialized. Pressing ENTER when "Clear" is displayed initializes the pairing information stored in this unit. • This function does not initialize the pairing information on the Bluetooth-enabled device. When pairing the unit again with the device, be sure to clear the pairing information on the Bluetooth-enabled device in advance. For information on how to clear the pairing information, refer to the Bluetooth-enabled device's instruction manual. Displays the name of the Bluetooth-enabled device connected to the unit. • The name is not displayed when "Status" is "Ready" and "Pairing". Displays the status of the Bluetooth-enabled device connected to the unit. "Ready": Not paired "Pairing": Paired "Connected": Successfully connected Firmware Update Setting item Update Notice Default Value Enable Version - Update via NET - Setting Details Availability of a firmware update will be notified via network. "Enable": Notify updates "Disable": Do not notify updates The current firmware version will be displayed. Press ENTER to select when you want to update the firmware via network. • You will not be able to select this setting if you do not have Internet access or there is nothing to update. 38