Onkyo TX-NR646 User Manual - Page 66
Distance, Level Calibration, En-34
View all Onkyo TX-NR646 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Setting Item Double Bass Default Value On Setting Details This can only be selected when "Configuration" "Subwoofer" is set to "Yes" and "Front" is set to "Full Band". Boost bass output by feeding bass sounds from the front left and right, and center speakers to the subwoofer. "On": Bass output will be boosted. "Off": Bass output will not be boosted. ●● The setting will not automatically be configured even if you performed the automatic speaker setup. Distance Set the distance from each speaker to the listening position. Settings are automatically configured if you use the automatic speaker setup. Setting Item Unit Front Left Center Front Right Height Left Height Right Surround Right Default Value feet/meters 12.0ft/3.60m 12.0ft/3.60m 12.0ft/3.60m 9.0ft/2.70m 9.0ft/2.70m 7.0ft/2.10m Setting Details Specify the unit of distance for configuring settings. "feet": When setting in feet (0.1 ft to 30.0 ft, in increments of 0.1 ft) "meters": When setting in meters (0.03 m to 9.00 m, in increments of 0.03 m) Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. ●● This setting cannot be changed if "Configuration" - "Powered Zone 2" is set to "Yes" and Zone2 is set to on. Specify the distance between each speaker and the listening position. ●● This setting cannot be changed if "Configuration" - "Powered Zone 2" is set to "Yes" and Zone2 is set to on. Specify the distance between each speaker and the listening position. Advanced Settings (Setup Menu) Setting Item Back Right Back Left Surround Left Subwoofer Default Value 7.0ft/2.10m 7.0ft/2.10m 7.0ft/2.10m 12.0ft/3.60m Setting Details Specify the distance between each speaker and the listening position. ●● This setting cannot be changed if "Configuration" - "Powered Zone 2" is set to "Yes" and Zone2 is set to on. Specify the distance between each speaker and the listening position. ●● This setting cannot be changed if "Configuration" - "Powered Zone 2" is set to "Yes" and Zone2 is set to on. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. ●● Default values vary depending on the regions. ●● The speaker "Distance" may be unable to be changed depending on the settings in "Configuration" - "Speaker Channels" / "Subwoofer". Level Calibration Adjust the level of each speaker with the built-in test tone. Settings are automatically configured if you use the Automatic Speaker Setup. Setting Item Front Left Center Front Right Height Left Default Value 0 dB 0 dB 0 dB 0 dB Setting Details Select a value between "-12 dB" and "+12 dB". A test tone will be output each time you change the value. Select the desired level. Select a value between "-12 dB" and "+12 dB". A test tone will be output each time you change the value. Select the desired level. Select a value between "-12 dB" and "+12 dB". A test tone will be output each time you change the value. Select the desired level. Select a value between "-12 dB" and "+12 dB". A test tone will be output each time you change the value. Select the desired level. ●● This setting cannot be changed if "Configuration" - "Powered Zone 2" is set to "Yes" and Zone2 is set to on. En-34