Onkyo TX-NR646 User Manual - Page 73
Power Management, En-41
View all Onkyo TX-NR646 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Setting Item Default Value Audio TV Out (SUB) Off Audio Return Channel Auto Auto LipSync On Setting Details You can enjoy audio through the speakers of the HDMI connected TV while this unit is on. "On": Use this function "Off": Do not use this function ●● Listening mode cannot be changed while "Audio TV Out (SUB)" is set to "On" and audio is being output through the speakers of the TV. ●● Depending on your TV set or input signal of the component, audio may not output through the speakers of the TV even if this setting is set to "On". In such case, audio is output from the speakers of the unit. ●● If you operate the MASTER VOLUME control on the unit when "Audio TV Out (SUB)" or "HDMI CEC (RIHD)" is "On" and audio is output from the TV speakers, audio will be output from the unit. If you do not want to output audio from the unit, change the unit or TV settings, or reduce the volume of the unit. ●● This setting is fixed to "Off" if "TV Out" "HDMI Out" is set to "MAIN". You can enjoy sound of the HDMI connected ARC compatible TV through the speakers connected to the unit. To use this function, set "HDMI CEC (RIHD)" to "On" in advance. "Auto": When enjoying the TV sound through the speakers connected to the unit "Off": When not using the ARC function This setting automatically corrects any desynchronization between the video and audio signals based on data from the HDMI LipSync compatible TV. "On": Automatic correction will be enabled. "Off": Automatic correction will be disabled. Power Management Setting Item Sleep Timer Default Value Off Auto Standby On/Off Auto Standby in Off HDMI Standby Through USB Power Out at Off Standby Advanced Settings (Setup Menu) Setting Details Select to turn the unit into standby mode automatically when the specified time elapses. Select a value between "10 minutes" to "90 minutes". "Off": Select if you do not want the unit to automatically switch to standby. This setting places the unit on standby automatically after 20 minutes of inactivity without any video or audio input. "On": The unit will automatically enter standby mode ("ASb" will light). "Off": The unit will not automatically enter standby mode. ●● "Auto Standby" is appeared on the display and TV screen 30 seconds before the Auto Standby comes on. ●● "Auto Standby" does not work when Zone 2 is active. ●● Default values vary depending on the regions. Enable or disable "Auto Standby" while "HDMI Standby Through" is on. "On": The setting will be enabled. "Off": The setting will be disabled. ●● This setting cannot be set to "On" if "Auto Standby" is set to "Off". When this function is "On", you can still have equipment connected to the USB port supplied with power even when this unit is in standby. ●● When this function is being used, the power consumption increases even when the unit is on standby. However, the increase in power consumption is kept to a minimum by automatically entering the HYBRID STANDBY mode, where only the essential circuit is operating. En-41