Onkyo TX-NR901 Owner Manual - Page 44
Speaker Level Calibration
![]() |
View all Onkyo TX-NR901 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
59/3@&OCPPL 1BHF 8FEOFTEBZ 0DUPCFS Basic Setup-Continued Speaker Level Calibration This section explains how to adjust the level of each speaker individually using the built-in test tone so that the volume of each speaker is the same at the listening position. Notes: • The speakers cannot be calibrated while the output of the TX-NR901 is muted, while a pair of headphones is connected, or when using the multichannel inputs. • Since the TX-NR901 supports THX, the test tone is output at the standard level of 0 dB (absolute volume setting 82). If you normally listen at volume settings below this, be careful because the test tone will be much louder. @. - ' / 4 GHI 7 PQRS +10 --/--- CUSTOM ABC 5 JKL DEF 6 MNO TV CH - 8 9 TUV WXYZ TV VOL 0 CLEAR DIRECT TUNING 2, 3 MACRO ZONE 2 MODE INPUT DIMMER T V INPUT + TOP MENU MENU AUDIO AD J SLEEP CH DISC - DISPLAY ENTER EXIT RETURN GUIDE SETUP VOL MUTING 1 2-4 1, 6 REC STEP / SLOW RANDOM 1 Press the scroll wheel, and then press the [SETUP] button. The main menu appears onscreen. 3 ENTER ENTER 4 ENTER 5 6 Use the Up/Down [ ]/[ ] buttons to select "3. Level Calibration," and then press the [ENTER] button. The Level Calibration menu appears and the pink noise test tone is output by the front left speaker. Advanced Menu 1.Speaker Setup 1-3.Level Calibration a.Left : 0dB b.Center : 0dB c.Right : 0dB d.Surr Right : 0dB e.Surr Back R : 0dB f.Surr Back L : 0dB g.Surr Left : 0dB h.Subwoofer : 0dB Quit:|SETUP| Note: Speakers that you set to No or None on the Speaker Configuration page (page 41) will not appear on this page. Use the Left/Right [ ]/[ ] buttons to adjust the speaker volume, and use the Up/Down [ ]/ [ ] buttons to select the other speakers. The volume can be adjusted from -12 to +12 dB in 1 dB steps (-15 to +12 dB for the subwoofer). Repeat step 4 until the volume of the test tone coming from each speaker is the same. Press the [SETUP] button. The setup menu closes. 2 ENTER ENTER Use the Up/Down [ ]/[ ] buttons to select "1. Speaker Setup," and then press the [ENTER] button. The Speaker Setup menu appears. Notes: • This procedure can also be performed by using the remote controller. First press the [TEST TONE] button to output the test tone. Use the [LEVEL-] and [LEVEL+] buttons to adjust the speaker volume, and use the [CH SEL] button to select the other speakers. • To calibrate the speaker more accurately, use a commercially available sound pressure level (SPL) meter. 44
![](/manual_guide/products/onkyo-txnr901-owner-manual-538292e/44.png)