Onkyo TX-NR901 Owner Manual - Page 50
Specifying the TV System, not American models, Changing the Input Source Display, for Use with
View all Onkyo TX-NR901 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
59/3@&OCPPL 1BHF 8FEOFTEBZ 0DUPCFS Basic Setup-Continued Specifying the TV System (not American models) This section explains how to specify the TV system used in your area. (This setting is not available on the American model.) 1 Press the scroll wheel, and then press the [SETUP] button. The main menu appears onscreen. 2 ENTER Use the Up/Down [ ]/[ ] buttons to select "0. Hardware Setup," and then press the [ENTER] button. The Hardware Setup menu appears. Note: • This procedure can also be performed by using the TX-NR901's [SETUP] button buttons, and [ENTER] button. Changing the Input Source Display for Use with a MiniDisc Recorder If you connect an -compatible Onkyo MiniDisc recorder to the TX-NR901's TAPE IN/OUT sockets, so that functions such as Auto Power On/Off work properly, you must change the input source display. This setting can only be changed on the TX-NR901. STANDBY/ON STANDBY POWER ON OFF PURE AUDIO UPSAMPLING ZONE 2 (GRN ) AUDIO REC ( RED ) SELECTOR DVD VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4 VIDEO 5 VCR 1 VCR 2 TAPE TUNER PHONO C D NET AUDIO DISPL AY MASTER VOLUME PUSH TO OPEN ENTER 1, 2 3 ENTER ENTER 4 ENTER 5 Use the Up/Down [ ]/[ ] buttons to select "4. TV Format," and then press the [ENTER] button. The TV Format menu appears. 0-4.TV Format a.TV Format :Auto Quit:[SETUP] Use the Up/Down [ ]/[ ] buttons to select "a. TV Format," and then use the Left/Right [ ]/[ ] buttons to select: Auto: The TX-NR901 automatically detects the TV system. PAL: Select if the TV system in your area is PAL. NTSC: Select if the TV system in your area is NTSC. Press the [SETUP] button. The setup menu closes. 1 TAPE Press the [TAPE] input selector button so that "TAPE" appears on the display. 2 TAPE Press and hold down the [TAPE] input selector button until "MD" appears on the display (about 3 seconds). Note: • To return to the original setting, while "MD" is being displayed, press and hold down the [TAPE] input selector button until "TAPE" appears on the display (about 3 seconds). 50