Onkyo TX-NR901 Owner Manual - Page 52

59/3@&OCPPL 1BHF  8FEOFTEBZ 0DUPCFS Basic Operation-Continued DIMMER 7 PQRS +10 --/--- CUSTOM 8 9 TUV WXYZ TV VOL 0 CLEAR DIRECT TUNING MACRO ZONE 2 MODE INPUT DIMMER T V INPUT + TOP MENU MENU AUDIO AD J SLEEP CH DISC - DISPLAY ENTER EXIT RETURN GUIDE SETUP VOL MUTING Scroll wheel SLEEP MUTING REC STEP / SLOW RANDOM Muting the TX-NR901 (remote controller only) With this function you can temporarily mute the output of the TX-NR901. MUTING Press the scroll wheel, and then press the remote controller's [MUTING] button. The output is muted and the MUTING indicator flashes on the display. To unmute the TX-NR901, press the remote controller's [MUTING] button again. Note: • The Mute function is cancelled when the volume is adjusted or the TX-NR901 is set to Standby. Using the Sleep Timer (remote controller only) With the sleep timer you can set the TX-NR901 so that it automatically turns off after a specified period. Press the scroll wheel, and then press the [SLEEP] button repeatedly to select the required sleep time. You can set the sleep time from 90 to 10 SLEEP minutes in 10 minute steps. The SLEEP indicator appears on the display when the sleep timer has been set. The specified sleep time appears on the display, then the previous display reappears. To check the remaining sleep time, press the [SLEEP] button. Note that if you press the [SLEEP] button while the sleep time is being displayed, you'll shorten the sleep time by 10 minutes. To cancel the sleep timer, press the [SLEEP] button repeatedly until the SLEEP indicator disappears. Note: • Any component in Zone 2 connected to the TX-NR901's 12V TRIGGER OUT will also turn off when the specified sleep time expires. Setting the Display Brightness You can adjust the brightness of the TX-NR901's display as follows. Press the scroll wheel, and then press the [DIMMER] button to select: dim, dimmer, or normal brightness. DIMMER Note: • This procedure can also be performed by using the TX-NR901's [DIMMER] button. Using Headphones You can connect a pair of stereo headphones (1/4-inch phone plug) to the TX-NR901's PHONES jack for private listening. PHONES STANDBY/ON STANDBY POWER ON OFF PURE AUDIO UPSAMPLING ZONE 2 (GRN ) AUDIO REC ( RED ) SELECTOR DVD VIDEO 1 VIDEO 2 VCR 1 VCR 2 PHONES REC OUT ZONE 2 OFF STEREO SURROUND THX ZONE 2 LEVEL Notes: • Turn down the volume before connecting your head- phones. • While a pair of headphones is connected to the PHONES jack, no sound is output by the speakers. (Any speakers in Zone 2 continue working.) • When a pair of headphones is connected, the listening mode is set to Stereo, unless it's already set to Mono, Stereo, Direct, or Pure Audio. When you disconnect the headphones, the previous listening mode is resumed. • Only the Stereo, Direct, Pure Audio, and Mono listening modes can be used with headphones. (Available listening modes also depends on the currently selected input source.) • When you use the multichannel inputs, only the front left and right channels can be heard in the headphones. 52