Onkyo TX-SR608 Owner Manual - Page 48
Picture Adjust, Game Mode, Wide Zoom, Film Mode, Edge Enhancement, Noise, Reduction, Brightness - no picture
View all Onkyo TX-SR608 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Picture Adjust Using Picture Adjust, you can adjust the picture quality and reduce any noise appearing on the screen. To view the TV picture while setting, press ENTER. To return to the previous screen, press RETURN. Note • If you are using the analog RGB input, the following settings are not available: "Film Mode", "Edge Enhancement", and "Noise Reduction". ■ Game Mode ` Off: Game Mode off. ` On: Game Mode on. If video signal delay occurs during playback on a video component (i.e. game console), select the corresponding input source and set the "Game Mode" setting to "On". The delay will decrease but in return the picture quality will become poor. ■ Wide Mode*1*2 This setting determines the aspect ratio. Note • When the "Game Mode" is set to "On", this setting is fixed at "Full". ` 4 : 3: ` Zoom: ` Wide Zoom: ` Full: ` Auto: According to the input signals and monitor output setting, the AV receiver automatically selects the "4 : 3", "Full", "Zoom" or "Wide Zoom" mode. For the monitor output setting (➔ 39). ■ Picture Mode*1*2 ` Thru: The following settings are set to the default values: "Film Mode", "Edge Enhancement", "Noise Reduction", "Brightness", "Contrast", "Hue" and "Saturation" ` Custom: You can set the following settings as you like: "Film Mode", "Edge Enhancement", "Noise Reduction", "Brightness", "Contrast", "Hue" and "Saturation" ` Cinema: Selected when the picture source is movie film, etc. ` Game: Select to use in connecting a game console. With Picture Mode, you can change the following settings to be suitable for the movie or game screen by one operation; "Film Mode", "Edge Enhancement", "Noise Reduction", "Brightness", "Contrast", "Hue" or "Saturation". En 48