Onkyo TX-SR608 Owner Manual - Page 57
Controlling Zone 2 with the Remote, Controller, Adjusting the Volume for Zone 2, Muting Zone 2
View all Onkyo TX-SR608 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Controlling Zone 2 with the Remote Controller ON/STANDBY ZONE2 Input selector buttons MUTING VOLR/X 1 Press ZONE2 and then press ON/STANDBY. Zone 2 turns on, the ZONE 2 indicator lights. 2 To select an input source for Zone 2, press ZONE2, followed by an input selector button. To select AM or FM, press the TUNER input selector repeatedly. (North American models) You can also select SIRIUS. Note • You cannot select different AM or FM radio stations for your main room and Zone 2. The same FM/AM radio station will be heard in each room. 3 To turn off Zone 2, press ZONE2 followed by ON/ STANDBY. Note • To control Zone 2, you must press the remote controller's ZONE2 first. Adjusting the Volume for Zone 2 ■ Operating with the remote controller 1 Press ZONE2. 2 Use VOL R/X to adjust the volume. ■ Operating on the AV receiver 1 Press ZONE 2 (the ZONE 2 indicator and Zone 2 selector on the display flashes). 2 Use -/+ within 8 seconds to adjust the volume. If your Zone 2 speakers are connected to a receiver or integrated amp in Zone 2, use its volume control to adjust the volume. Muting Zone 2 ■ Operating with the remote controller Press ZONE2 followed by MUTING. Tip • To unmute, press ZONE2 followed by MUTING again. Note • Only analog input sources are output by the ZONE 2 LINE OUT and FRONT HIGH OR FRONT WIDE OR ZONE 2 SPEAKERS L/R terminals. Digital input sources are not output. If no sound is heard when an input source is selected, check if it's connected to an analog input. • While Powered Zone 2 is being used, listening modes that require surround back speakers or front high speakers or front wide speakers (6.1/7.1), such as Dolby Digital EX, DTS-ES, THX Select2 Cinema, Dolby Pro Logic IIz height, and Audyssey DSX™ are unavailable. • While Zone 2 is on, V functions will not work. • You cannot select different AM or FM radio stations for your main room and Zone 2. The same FM/AM radio station will be heard in each room. For example, if you have an FM station for the main room, that station will also be used in Zone 2. • Zone 2 can also be unmuted by adjusting the volume. En 57